• APP CONTROL: App can remotely control and check the status of the mower in real time. Nearly 0-Insalltion and ready-to-go after open the box. As far as it is clearly defined edge around the full perimeter of your lawn, you just need place the charging dock in suitable position and connect power, then start the machine from charging dock, it will directly work. No perimeter wire or antenna to install
• CHARGING STATION: Robot mower automatically returns to charging station when running low on battery, then resumes mowing after a quick 2-hour charge time
Designed for lawns up to 1/6 acre, when using under auto charge mode, while leaving fine grass clippings to nourish your lawn. When this mower operates in Drop-N-Mow mode, it does not require the lawn being installed with the charging dock and could work for up to 3 hours, covering up to 1,600 sq. ft. So best for lawn with secondary small areas, while those secondary areas don’t necessarily need outdoor power supply.
• OPTICAL NAVIGATION TECHNOLOGY: Advanced sensors and a wide-angle camera efficiently identify grass and guide the mower, even in tricky lighting* *Operating only during daylight hours with vision technology, OcuMow helps protect nocturnal wildlife like hedgehogs, allowing them to roam safely at night. Enjoy a beautifully maintained lawn while caring for the creatures that share it.
• OBSTACLE AVOIDANCE: Ultrasonic sensors detect and steer clear of objects as small as 6 inches for a smooth mowing experience
• NO GO AREAS: Easily set up a virtual fence within your yard using the included 32-feet of magnetic strips, requiring no digging or power source
CLIMBS UP TO 35% SLOPE: Deep tread wheels and robust drive system climb slopes up to 19° to handle complex terrains effortlessly
• FOR BEST RESULTS: A clearly defined edge around the full perimeter of your lawn is suggested to prevent the mower from leaving the designated area. Adjustment of the lawn edges may be required
• INCLUDES: Robot mower, MX 24V 4.0Ah battery, charging station, 32-feet of magnetic strip, 12 x magnetic strip pegs, 6 x blades and 6 x screws
* Maximum initial battery workload voltage (measured without a workload) is 24 volts. The nominal voltage is 21.6 volts. Runtime is based on the time for the included battery to deplete with no load and will vary depending on use case. Extra batteries can extend the running time (sold separately).
